Por favor, use este identificador para citar o enlazar este ítem:
https://hdl.handle.net/20.500.12008/38606
Cómo citar
| Título: | A 2.4GHz LNA in a 90-nm CMOS technology designed with ACM model |
| Autor: | Fiorelli, Rafaella Silveira, Fernando Peralías, Eduardo Vázquez, Diego Rueda, Adoración Huertas, José Luis |
| Tipo: | Ponencia |
| Palabras clave: | Radiofrequency, Low noise amplifiers, ACM model, Design methodology |
| Descriptores: | CIRCUITOS INTEGRADOS |
| Fecha de publicación: | 2008 |
| Resumen: | As part of a Low-IF ZigBee receiver, a 2.4GHz differential common source low noise amplifier, implemented in a 90nm mixed/RF 7M CMOS process and designed in moderate inversion, is presented in this work. Design methodology and simulation results from Spectre-RF simulator are presented. With 2.5V supply voltage, the LNA achieves a noise figure of 2.5dB, an IIP3 of 1dB and gain higher than 10dB, with a current consumption of 12mA. The LNA area without pads is 720μm x 710μm. |
| Editorial: | ACM |
| EN: | 21st Annual Symposium on Integrated Circuits and System Design. SBCCI '08. Gramado, Brasil, 2008 |
| Citación: | Fiorelli, R, Silveira, F, Peralías, E, Vázquez, D, Rueda, A, Huertas, J. “A 2.4GHz LNA in a 90-nm CMOS technology designed with ACM model”. 21st Annual Symposium on Integrated Circuits and System Design. SBCCI '08. Gramado, Brasil, 2008. Doi: 10.1145/1404371.1404398 |
| Departamento académico: | Electrónica |
| Grupo de investigación: | Microelectrónica |
| Aparece en las colecciones: | Publicaciones académicas y científicas - Instituto de Ingeniería Eléctrica |
Ficheros en este ítem:
| Fichero | Descripción | Tamaño | Formato | ||
|---|---|---|---|---|---|
| FSPVRH08.pdf | 2,12 MB | Adobe PDF | Visualizar/Abrir |
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons
