Por favor, use este identificador para citar o enlazar este ítem:
https://hdl.handle.net/20.500.12008/20752
Cómo citar
| Título: | Design of a micropower signal conditioning circuit for a piezoresistive acceleration sensor |
| Autor: | Arnaud, Alfredo Barú, Marcelo Picún, Gonzalo Silveira, Fernando |
| Tipo: | Artículo |
| Palabras clave: | Signal design, Piezoresistance, Acceleration, Pacemakers, Circuit testing, Threshold voltage, Integrated circuit measurements, Microelectronics |
| Descriptores: | ELECTRÓNICA |
| Fecha de publicación: | 1998 |
| Resumen: | The design and test of a micropower signal conditioning circuit for a piezoresistive accelerometer is presented. The circuit is intended for sensing human body motion in rate-adaptive cardiac pacemakers. A strategy is proposed to allow handling of the piezoresistive sensor with the desired level of consumption. Experimental results show the fabricated circuit is able to measure accelerations in the range from 0.04 g to 0.34 g with a total consumption of less than 3 /spl mu/A with supply voltages down to 2 V. |
| Descripción: | Postprint |
| Editorial: | IEEE |
| EN: | ISCAS '9. IEEE International Symposium on Circuits and Systems, 1998. . Proceedings. |
| DOI: | DOI: 10.1109/ISCAS.1998.704364 |
| Citación: | Arnaud, Alfredo, Barú, Marcelo, Picún, Gonzalo, Silveira, Fernando. Design of a micropower signal conditioning circuit for a piezoresistive acceleration sensor [en línea] ISCAS '9. IEEE International Symposium on Circuits and Systems, 1998. |
| Licencia: | Licencia Creative Commons Atribución – No Comercial – Sin Derivadas (CC - By-NC-ND) |
| Aparece en las colecciones: | Publicaciones académicas y científicas - Instituto de Ingeniería Eléctrica |
Ficheros en este ítem:
| Fichero | Descripción | Tamaño | Formato | ||
|---|---|---|---|---|---|
| ABPS98.pdf | 80,2 kB | Adobe PDF | Visualizar/Abrir |
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons
