Por favor, use este identificador para citar o enlazar este ítem:
https://hdl.handle.net/20.500.12008/21146
Cómo citar
| Título: | Shielded electronic current transformer |
| Autor: | Slomovitz, Daniel de Souza, Heriguatí |
| Tipo: | Artículo |
| Palabras clave: | Compensation, Current, error, Guard, Measuring transformer, Phase displacement, Power frequency, Shield |
| Fecha de publicación: | 2004 |
| Resumen: | A current transformer with nominal ratio 10 A to 10 mA, intended for low-frequency applications, was developed. It includes an electronic device to reduce the magnetizing current, and a continuous shield in the secondary winding (coaxial cable) in order to eliminate the effect of stray capacitances. No guard-source is connected to the shield. It is proposed in this paper to leave the cable-shield-potential floating. This leads to high-accuracy results (ratio errors and phase-displacements in the order of few parts in 10/sup 6/ from 50 Hz to 1 kHz). |
| Editorial: | IEEE |
| Citación: | Slomovitz, D., de Souza, Heriguatí. Shielded electronic current transformer [en línea] IEEE Transactions on Instrumentation and Measurement, 2004, v. 54, no. 2. doi 10.1109/TIM.2005.843565 |
| Licencia: | Licencia Creative Commons Atribución – No Comercial – Sin Derivadas (CC - By-NC-ND) |
| Aparece en las colecciones: | Publicaciones académicas y científicas - Instituto de Ingeniería Eléctrica |
Ficheros en este ítem:
No hay ficheros asociados a este ítem.
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons
